Freezing water expands by about 9% and can split a full water butt. Learn how to drain, insulate, clean and inspect your water butt before hard frosts, plus which special cases need different treatment.
Winterising your garden irrigation system prevents costly frost damage. This guide covers shutting off the water supply, draining hoses and sprinklers, detaching timers, and storing components frost-free, with practical checks for each step.
Water butt overflow usually means excess rainwater has no controlled escape route. This guide explains the common causes, from missing overflow outlets to incompatible downpipes, and compares two practical fixes: overflow kits and rain diverters, with installation checks and limitations.
A clean water butt means fresher stored rainwater and fewer smells. This guide explains when and how to clean the butt, what to use, and the simple accessories—downpipe filters, gutter brushes and close-fitting lids—that keep debris out before it becomes a problem.
Uneven drip irrigation is usually caused by pressure differences along the line, elevation changes, clogged emitters, or mixing non-compensating types. This guide explains how to identify the cause and choose pressure-compensating emitters that maintain a steady 4 litres per hour within their specified pressure range.
Soaker hoses weep along their whole length and suit small, flat beds on heavy soil. Drip lines target individual emitters and handle slopes, long runs and irregular spacing. This guide matches each system to your bed’s conditions.
